Main

Related Links

Categories



Kitchen Exhaust Fans

Kitchen Exhaust Fans - 43 items found


New4' NEW Concession Trailer Hood Restaurant Grease Exhaust Vent Fan & Curb Kitchen
Hood Systems, Fire Suppression
FREE SHIPPING! NEW 4' x 30" Grease Exhaust Hood System
$1,295.00
Bids: 0
End time: 15-Feb-12 08:55:01 PST

NewRestaurant Hood System 5ft Commercial Kitchen Vent w/ Make-Up Air & Exhaust Fans
Hood Systems, Fire Suppression
Inventory Overstock Sale - Quantities Limited SAVE
$2,097.00
Bids: 0
End time: 15-Feb-12 06:18:51 PST

New7' Kitchen Restaurant Grease Hood Exhaust System Vent Ventilation Fume Fan Curb
Hood Systems, Fire Suppression
FREE SHIPPING! All Exhaust Only Package Curb Roof More!
$1,730.00
End time: 14-Feb-12 09:58:35 PST

NewBroan L500K White Commercial Kitchen Exhaust Fan 481 CFM 4.4 Sones Metal Grille
Ceiling Fans
Orders over $199 receive free Standard Ground Shipping*
$299.52
End time: 08-Mar-12 09:07:41 PST

NewBroan Nutone Exhaust Fan Kitchen Bathroom Workshop Ceiling Ventilation Kit 505
Fans & Blowers
$79.99
End time: 08-Mar-12 08:27:11 PST

NewKitchen Stove Range Exhaust Hood Stone range hood Broan kitchen exhaust fan
Other
$2,450.00
End time: 13-Feb-12 07:56:38 PST

NewCommercial Kitchen Hood 4ft Restaurant Hood System w/ Make-Up Air & Exhaust Fans
Hood Systems, Fire Suppression
Inventory Overstock Sale - Quantities Limited SAVE
$1,897.00
Bids: 0
End time: 12-Feb-12 16:06:48 PST

New11' Grease Makeup Air Exhaust Hood System Stainless Kitchen Vent Kitchen w/ Fans
Hood Systems, Fire Suppression
NEW 11' x 48" Stainless Steel w/ Fan & Curbs
$3,599.00
End time: 12-Feb-12 12:50:53 PST

New6' Restaurant Kitchen Makeup Air MUA Grease Fume Exhaust Hood System Fan Curb
Hood Systems, Fire Suppression
FREE SHIPPING! Exhaust Hood System w/ Fan & Curbs
$2,499.00
Bids: 0
End time: 11-Feb-12 18:39:10 PST

NewBoro Ventilating Exhaust 200~240V Kitchen Bathroom Fan Home Electric Equipment
Electric Fans
$9.98Buy It Now: $14.98
Bids: 0
End time: 11-Feb-12 18:07:55 PST

View more items

Cleaning Kitchen Exhaust Fan?

Jul 31, 2006 by Trix_R_not_4_kids | Posted in Other - Food & Drink

I have two very stubborn exhaust fans in my kitchen. I always unscrew them and soak them in the kitchen sink with dishwashing soap and sometimes Ajax cleaner for a few hours and try to rub off the dirt from it, but I don't always success. My fans still come out a little sticky. What is a good way to clean my exhaust fans?


Vinegar & Water you use 4cups of water & 2Tbsps vinegar let them soak for a few hours the problem will be solved.Good Luck
Home Remedy Book


Try that product CLR, it seems to work really good with anything, even coffee pots. Good Luck.


Instead of Ajax cleaner that contains bleach...try one tablespoon of ammonia with your dishwashing soap it will lift off the grease.


sticky means oily stuff.
rub some baking powder mixed with water on it. let it rest for a while.
scrub it with detergent. wash .


washing powder dissolves straight up otherwise use meth petrol kero, but wash thouroughly

How do you find/install a replacement over-stove kitchen exhaust fan?

Nov 24, 2006 by markatger | Posted in Maintenance & Repairs

Are is making funny noises and dying. The hood is labeled with the brand Nautilus. But I'm not sure how to tell what the model is. This range is over 10 years old, so not sure what the match it up with a replacement model.

It looks fairly straightforward to replace, but any tips in that area would be great!


Answer coming up as fast as I can type...

REPLCEMENT KITCHEN HOODS:

Manufacturer of ETL listed hoods. Stainless steel and pre-engineered
www.captiveaire.com

Kitchen Range Hoods
Spice up your kitchen design with Italian-made designer range hoods!
www.futurofuturo.com

800-APPLIANCE-San Diego
Free service call with any repair Satisfaction guarantee or don't pay
800appliance.com

Low Rate Appliance Repair
Free service call with repair. Over 20 years experience.
www.lowratesappliancerepair.com

HOW TO CLEAN AND REPAIR A KITCHEN RANGE HOOD:

A range hood that doesn't adequately remove smoke and smells from your kitchen is usually suffering from one of a few common problems: The grease filter or some part of the exhaust ductwork may be clogged, or the fan may be bad. Neither of these repairs should take you much time.

Overall Things You'll Need:

Plumber's Snake
Ammonia
Soap
Replacement Fan
Screwdriver, or nut driver and socket
Old Toothbrush
Heavy Rag
Plastic Pan

Unclogging the exhaust system:

Instructions:

STEP 1: Remove the grease filter by sliding it out of its clips.
STEP 2: Submerge the filter in a plastic pan filled with hot, soapy water and 1/2 cup (4 fl oz/125 ml) ammonia. Let it soak for at least 15 minutes. If it's still dirty, soak it again, then rinse it thoroughly and set it aside to dry.
STEP 3: Remove the exhaust fan. Unplug the fan, then use a screwdriver or a nut driver and socket to take out the screws that attach it to the hood.
STEP 4: Clean the fan blades with an old toothbrush dipped into the ammonia-water mixture (see Warning).
STEP 5: Clean the inside of the exhaust ductwork, using a plumber's snake with a heavy rag tied around the end. Push the snake through the ductwork. Soak the rag in the ammonia and water mixture, then run it through the ductwork. Rinse out the rag and repeat the operation until the duct appears to be clean.
STEP 6: Clean the exhaust hood that's attached to the outside of your house. Use the old toothbrush and the ammonia-water mixture to loosen the grit and grime around the flapper plate. Make sure the plate moves freely when you're done. If it sticks closed, it can prevent the exhaust hood from working.
STEP 7: Reinstall the grease filter.


REPLACING THE FAN MOTOR:

Instructions:

STEP 1: Remove the grease filter by sliding it out of its clips.
STEP 2: Turn on the fan and inspect the motor. It needs to be replaced if it hums rather than turns, turns very slowly, runs for a short time then stalls, or feels very hot and won't turn.
STEP 3: Disconnect and remove the fan, following step 3, above.
STEP 4: Take the fan to an appliance store to get an exact replacement.
STEP 5: Install the new fan.

OVERALL TIPS AND WARNINGS:

Never put a grease filter in your dishwasher to clean it. You could end up with a film of hard-to-remove grease on the dishwasher walls.
Clean your grease filter monthly. It's your first line of defense against grease and grime that can damage the fan motor and plug the ductwork.
When cleaning the blades on the exhaust fan, take care not to wet the motor. The water could short-circuit the motor when you reinstall it.

Hey, any tips on how to clean a greasy kitchen exhaust fan?

Jul 02, 2007 by Kev | Posted in Maintenance & Repairs

The fan collects a lot of oil from the cooking, which resists being washed off...


Hot water and Dawn dishwashing liquid. You can use a scouring pad to help remove the grease.
If it's really heavy duty, then use a small putty knife and gently scrape off as much as you can. Be careful not to bend the blades though.

How does the motor works in kitchen exhaust fan?

Oct 05, 2007 by qi | Posted in Engineering

what type of motor does it used and explain how it works


A transformer does not create DC from AC. Most motors are not DC.
You need to read up on Split Phase motors to understand how low horsepower AC motors work.

In my kitchen I have to cook food, I want to make automatic exhaust fan when kitchen fill with smoke?

Jan 03, 2008 by Jagu Bisunke | Posted in Maintenance & Repairs

Regarding to above question, while cooking food I have to on/off exhaust fan manually but I want to have fully automatic circuit to controller the exhaust fan. When my kitchen get smoke (from burnt oil, burnt chilly etc.) the exhaust fan automatic on for five (5) minutes then off after 5 minutes. Could any body provide me the circuit diagram with parts list. I will be very grateful with you.

Thank you very much for your cooperation in advance.


Although it sounds like a good idea it does have one drawback that you should consider. If the smoke is caused by a real fire you would NOT want the exhaust fan to come on automatically.

I don't know of any device that is made that will do what you want. I suspect you could modify a smoke detector so that it would activate a relay rather than the alarm. This would require determining the voltage and current available from the alarm buzzer circuit. You would need to find a relay that could work using that available power. It would probably require some desoldering and soldering to connect the smoke alarm to the relay. You may be able to find a time delay relay that will work off the available power from the alarm circuit. If not you may need a separate time delay relay to provide the 5 minute on/off time.

Note most smoke alarms have a small amount of radio active material. Please use caution if you decide to cut one open.

There are smoke detectors typically used for industrial installations that have a built in relay for remote signaling. This may be an easier route since you won't need to do any modifications to the smoke detector itself. You would still need a timer. (See the last link below.)

Mouser Electronics (link below) will have relays and timers.

 
Kitchen Exhaust Fans News


Your bathroom exhaust fan makes noise.. but is it actually working?
While doing my brief initial walk-thru of the interior, I also turn on everything that removes air from the house, such as bathroom exhaust fans, kitchen exhaust fans, and clothes dryers. I do this to create negative pressure in the house,

Small Kitchen Fire Breaks Out in Apartment
A small fire had broken out in the Villa Fontana Apartments when a kitchen exhaust fan short circuited. The resident called the apartment maintenance worker who came and put out the flames with a fire extinguisher. The maintenance worker then says he

Melink Intelli-Hood wins product of the year
Melink Intelli-Hood wins product of the year Melink, located in Milford, received the award during the expo's annual Innovation Awards ceremony, where Intelli-Hood won in the Ventilation category. The Intelli-Hood controls for commercial kitchen hoods reduce exhaust and makeup fan speeds during and more »

DIY insulation projects make for a more comfortable home year round
One way to promote ventilation in areas of the home that may be more susceptible to moisture is to install exterior exhaust fans. Commonly needed in a home's kitchen or bathrooms, exterior fans help push damp air outside. Whether you reside in a warm

ASTM F2519 - 05(2011) Standard Test Method for Grease Particle Capture ...
The pressure drop results can be added to the pressure drops of other components in an exhaust system to determine the total exhaust fan pressure requirement. The particulate capture efficiency can be used with known particulate size emission data for



 
Exhaust Fans

Broan Model 509S 8-Inch Through-Wall Utility Fan with Integral Rotary Switch, 180 CFM, 6.5 Sones


Broan

List Price: $143.60
Price: $73.74
You Save: $69.86 (49%)

Product Details

  • Built in damper minimizes backdrafts for drive efficiency
  • 180 CFM 6.5 Sones
  • Exclusively designed polymeric fan blade

Product Description

The Broan/Nautilus 180 cfm call the shots discharge fan helps eliminate humidity from laundry rooms, tobacco smoke from rec rooms and workshops, or cooking fumes from kitchens. The fan is clever of filtering 180 cubic feet of air per coup d'oeil at 6.5 sones, and the housing adjusts to fit walls 4-1/2-to-9-1/2-inches thick. The fan comes executed with a built-in damper to minimize backdrafts and an 11-1/2-inch na metal grille. The fan is backed with a 1-year circumscribed manufacturer's warranty.

Weller WSA350 120v Bench Top Smoke Absorber


Cooper Hand Tools

List Price: $69.99
Price: $59.99
You Save: $10.00 (14%)

Product Details

  • Fan is soundless and will not add significant noise to the workspace
  • Proficient for workspaces using more active fluxes
  • Removes indecisiveness fumes from soldering workbench

Product Description

The WSA350 removes swinging fumes from the benchtop by drawing the smoke through an activated carbon clean. Powered by an exceptionally quiet fan, the WSA350 can answer up to 1.37 cubic meters of air per minute. The connoisseur can be easily adjusted to multiple positions, optimizing its explode-absorbent performance. Features: Removes indecision fumes from soldering workbench Great for workspaces using more effective fluxes used with lead-free solder Fumes are engaged by the replaceable carbon-activated filter Includes one replacement winnow Stand allows the smoke absorber to be adjusted to varying angles Fan is peaceful and will not add significant noise to the workspace ESD safe

Fan-Tastic Vent 01100WH Endless Breeze 12V Fan


Fan-Tastic Vent

List Price: $84.95
Price: $59.99
You Save: $24.96 (29%)

Product Details

  • Gratis-Standing
  • Second air flow
  • Frivolous-Weight (under 5 pounds)

Product Description

Perpetual Breeze 12 Volt Fan features trice air flow, portable, free-standing, small, light-weight (under 5 pounds), multi-expressly, three speeds, low sound levels and low amp. Draw 12 volt beat the drum for with cord 12 inch ten blade rotary fan on a trip air volume.

Eco Solutions Solar-Powered Auto Vent Fan


Perfect Solutions

List Price: $28.00
Price: $28.00

Product Details

  • Constructed with recycled ersatz, the little fan is an earth-friendlier alternative to other models
  • Solar-powered fan keeps cars parked in sun compassionate cooler and more comfortable upon return
  • Includes a top-up window attachment and cut-to-size PVC gap moldings; requires no tools

Product Description

This solar-powered fan operates automatically in ordain sunlight to keep your parked car feeling cool and relaxing for your return. Works by blowing hot air out its built-in allow to become known, while taking in cooler, fresher air from the vehicle’s income ducts. Contains recycled plastic. Includes flop-up window attachment and cut-to-size PVC gap moldings. No tools or batteries required.

Performance evaluation of handheld airflow instruments applied to commercial kitchen exhaust systems.(Report): An article from: ASHRAE Transactions


List Price: $9.95
Price: $9.95

Product Description

This digital instrument is an article from ASHRAE Transactions, published by American Beau monde of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. on January 1, 2011. The to the fullest of the article is 7847 words. The page at long last shown above is based on a typical 300-consultation page. The article is delivered in HTML shape and is available immediately after purchase. You can view it with any web browser.

From the writer: Laboratory measurements have been made to determine the correctness of several handheld instruments when used to measure the exhaust airflow rates during commercial kitchen airflow balancing. The instruments included 4 in. (0.1 m) and 2.75 in. (0.07 m) rotating vane anemometers, a hot blur anemometer, a velocity grid, and flow hoods with 2 X 2 ft (0.61 X 0.61 m) and 2 X 4 ft (0.61 X 1.22 m) hoods. Grease strainer configurations included conventional baffle filters, cyclone filters, and notch filters mounted in an 8 ft (2.4 m) canopy exhaust hood. Exhaust airflow berate measurements were made at approximately 2000, 3000, and 4000 scfm (0.94, 1.4, and 1.9 m3/s) for each factor and each filter type. Measurements were made with a gas fryer, half-enormousness electric oven, and a gas underfired broiler idling (hot tests) and turned off (promptly tests) to determine the influence of hot appliances. Excess rates determined using calibrated go nozzles in the supply air system agreed to within a few percentage points of those systematic using the flow hoods. The other instruments large did not provide accurate results unless an make away correction factor, or K-factor, was used.

Citation Details
Tenure: Performance evaluation of handheld airflow instruments applied to commercial kitchen exhaust systems.(Statement)
Author: Thomas H. Kuehn
Publication: ASHRAE Transactions (Periodical/Journal)
Date: January 1, 2011
Publisher: American Polite society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
Bulk: 117 Issue: 1 Page: 690(12)

Article Type: Dispatch

Distributed by Gale, a part of Cengage Learning

Array

Revealing the fan constituent in all its' greasy goodness! This is an 8" fan unit, but it is predominant - the motor is a 1/20 horsepower 4 pole ...