Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler
List Price: $162.43
Price: $89.95 You Save:$72.48 (45%)
Product Details
Tipsy-capacity pneumatic upholstery stapler with 185 staple armoury
Measures six inches incredible and nine inches long; weighs 2 pounds
Vivacious and easy jam-clearing mechanism
Product Description
The Doorman-Cable US58 1/4-Inch to 5/8-Inch, 22-Gage C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of beneficial features. It uses standard Senco C Class 22-gauge, 3/8-inch diadem staples to get the job done right, and it includes a 1-inch nose widening for those tough to reach areas. The high-competence bottom-load magazine handles 185 staples, and the driver supervise moves back to easily clear jams from the journal. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.
Customer Reviews
Quality Staple gun
Smooth operation, No jam, shot over 6000 staples for one job with trouble free operation and it's still working great.
2010-08-19
| Helpful Votes: 0 | Rating: 5
Porter-Cable Upholstery Stapler
Lots of products out there to meet this need. Porter's unit is well built, feels solid, easy to operate, and a great entry price-point. I'm not a professional upholstery fabricator, I'm re-doing my boat upholstery and am using this unit with my Porter-Cable compressor, using 3/8" x 3/8" stainless steel staples and it's been great. And I'm confident that I could complete my job, and turn it around in near new condition on EBay and get 80-90% of my money back!
One hint, adjust the air on your gun and test staples. At the higher end of the range it'll set the staples so far that the fabric will pull out (depending on your material and base). I had to run it on the lowest setting in the recommended range, which was as low as my regulator would adjust.
I definitely recommend this unit. Also, great vendor as well!
2010-07-23
| Helpful Votes: 0 | Rating: 4
This is a Pro Stapler for sure!
Like any well made product the Porter Cable Upholstery Stapler is absolutely a delight to use. The 1" long extension is a must for anyone working on upholstery projects. We used it recently on some oak chairs using 3/8" fine wire staples from Amazon at 70psi. Follow the instructions and you should have no problems.
2010-01-22
| Helpful Votes: 0 | Rating: 5
Performed Flawlessly
Have done various reupholstering projects through the years and had always hand stapled. What a difference this this tool made! It reduced the time required to complete the project and greatly improved the quality of the work. It did not "misfire" once. It is lightweight and easy to use. I highly recommend the tool, at least for home use.
2010-01-17
(Illinois, USA) | Helpful Votes: 0 | Rating: 5
excellent stapler
I bought this to replace one exactly like it that I have been using for 7 years. It broke because I FORGOT to oil it and the inside rusted....In conclusion take care of your tools and this is an excellent one.
Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case
List Price: $39.99
Price: $31.73 You Save:$8.26 (21%)
Product Details
Hurried release magazine for easy loading
Drives 1/4" thru 9/16" staples
Adjustable air deplete & Staple viewer
Product Description
Lightweight, air-operated ordinary gun is easy to use on a number of projects. Accepts a heterogeneity of staple sizes for different applications. Operating PSI: 60 - 100, Fasteners Against: No.4 Staples, Fastener Sizes (in.): 1/4, 5/16, 3/8, 1/2 and 9/16, Fastener Perceptiveness Per Strip: 100, Coil or Strip: Skin, Inlet Size (in.): 1/4, Min. Hose Evaluate (in.): 3/8, Case Included: Yes, Tool While (in.): 2.9, Tool Weight (lbs.): 8 29/32
The Surebonder 9600 Pneumatic Exquisite Wire Staple Gun helps you get a wide mix of jobs done quickly and professionally. With a quick-manumit magazine that's incredibly easy to refill, this inebriated-speed heavy-duty staple gun can grip everything from tough roofing projects to at-home upholstery fix up.
The Surebonder 9600 Pneumatic Fundamentals Gun:
Offers a quick-release, 100 chief magazine
Operates on compressed air between 60 psi and 100 psi
Uses niggardly crown (3/8 inch) 18-rule wire staples from 1/4- to 9/16-inch
The 9600 is finished for tough construction applications. View larger.
The Surebonder 9600 makes upholstery jobs expeditious and easy. View larger.
Drop-in primary loading makes on-the-job refills fast. Aspect larger.
Fast, Safe Performance The Surebonder 9600 pneumatic elementary gun offers the speed and power you'll need for construction applications like installing insulation, laying down roofing felt, and putting up house wrap. This fluctuating well-read tool also offers the precision necessary for specialty tasks like television door repair, finishing cabinet backs, and crafting photograph frames.
This staple gun's quick-release arsenal holds 100 staples and offers incredibly serene drop-in loading for fast on-the-job refills. A expedient view window makes it easy to keep watch of your staple supply. The gun also features a reliable safe keeping mechanism that prevents accidental firing.
Warm, User-Friendly Design Offering a well-balanced trunk and rubber grips for comfort, the gun is designed to sit evenly in your disseminate, letting you take on large, time-consuming jobs without worry or fatigue. The 9600 pneumatic staple gun also provides adjustable air exhaust, which means you can by far direct the air away from yourself and delicate work surfaces.
Good in, Dependable Fastening This durable, heavy-job tool is designed to operate with clean, dry, regulated compressed air, between 60 psi and 100 psi.
The 9600 uses narrow down straits crown (3/8 inch) 18-guide wire staples in 1/4, 5/16, 3/8, 1/2, 17/32, and 9/16-inch lengths. To certain compatibility and performance, you should use Surebonder # 4, Arrow T50, or Stanley TRA700 Series Podgy Duty Staples.
This stapler is factory-equipped with a virile quick connector to help you get set up quickly, and it includes a boisterous-impact carrying case.
About Surebonder Surebonder is a well-respected provider of squiffed-quality fastening and adhesive products. Specializing in seal guns, rivet tools, and staplers, along with the cement sticks, rivets, and staples that ensure their appearance, Surebonder delivers dependable, innovative products that compass from industrial fasteners and hardware to floral and crafting tools.
What's in the Box 9600 Pneumatic Primary Gun, 2 Hex Wrenches, 1/4-inch Brilliant Release Connector, and carrying case.
Customer Reviews
Good Stapler for the money
Nice little stapler for the money. Works great for stapling fabric on flat surfaces. The design of the safety tip ensures that your staple is a few millimeters behind where the safety tip meets your work piece. This makes it very difficult to use in tight spaces. I did experience several misfires where the drive pin that deployes the staple didn't fully tract once a staple was ejected, forcing me to have to open the staple magazine and manually push it back to the "ready" position. This seemed to happen regularly when attempting to use in tight spaces, but not so much on flat open spaces where the safety tip could be fully deployed.
2010-08-23
| Helpful Votes: 0 | Rating: 4
Be Warned
I received this as a gift.
It will not take narrow crown staples, not 1/4 inch, not 3/8 inch. It looks like it probably takes 1/2 inch wide staples.
There is no possible way it could take anything else because of how the closing mechanism works.
Unless mine is a defect or something.
2010-08-15
| Helpful Votes: 0 | Rating: 1
Easier on the hands
I purchased this tool to install carpeting on a stairway. The thought of having to do that task using a hand stapler never crossed my mind. I searched for staplers and found the Surebonder 9500 and based on previous reviews, I purchased the tool. I was not disappointed. I used Arrow staples and never had a misfire. I ran about 2000 staples through the gun over two days. Job completed. The only downside was that the plastic cap or air discharge left a few black marks on the walls. Good tool for small jobs. The next project is insulation.
Exceptional performance and value
I waited to run my first 1000 staples through the Surebonder before writing a review. It's been outstanding in every way. Lightweight and comfortable to operate, it delivers ample power to staple into dense hardwood with apparent ease, without jamming or misfiring. While power settings must be regulated at the compressor, the stapler has a very effective safety switch preventing firing unless pressed down on a surface. I hope that my favorable impression is born out over the next 100K staples.
Works Great
My wife had an upholstered chair from her grandma. It was not real old, but two of the springs came loose. To get at those, multiple layers of upholstery had to be pulled up. I bought a professional upholstery staple puller and this stapler. These two items made the job easy and the outcome was great.
We also used the stapler to attach triangular flags to dowels for a church kids' program.
I expect to use it for other things in the future. The price makes it nice for an occasional user like myself.
One thing I wish was that the sides of the stapler tapered to a point that corresponded to the center of the staple. That way you could naturally know where the staple would go. You have to think about centered the staple the way it is constructed.
Air Locker U630E Electric 22 Gauge 3/8 Inch Crown Upholstery Stapler / 18 Gauge Brad Nailer
Product Details
Input Voltage: 110V, 60HZ , 12.5 Amp
Arsenal capacity: Holds up to 100 nails or staples
Max Reach of Nails: 18 Gage brad nails 3/8" to 5/8" in period
Product Description
U630E by Air Locker is an tense upholstery stapler and nailer in one sturdy tool. This professional thrilling upholstery stapler / nailer shoots 3/8" crown Senco and Door-keeper Cable upholstery staples "C" type & 18 figure brad nails.
Air Locker U630L 22 Gauge Long Nose (1-5/8 Inch) Upholstery Stapler (3/8 Crown) Staples 1/4 - 5/8 Inches
Product Details
Bottom encumbrance magazine
Firing Modes: Trigger
Fastener Pattern: 22 Gauge Type "C"
Product Description
It uses 22 guideline type C upholstery staples. U630L automatically adjust for fastener lengths between 1/2", 1/4", 3/8", 5/8". Rubber perception handle with adjustable exhaust to keep oil condensation away from toil. It also features a long nose for reaching & stapling the unreachable area's with standard nose. It includes carrying circumstance & operating manual.
Senco SFW08 Fine Wire Upholstery - Utility Stapler 3/8" Crown
List Price: $144.87
Product Details
Plump duty aluminum body
Easy as can be-open latch for quick and easy loading
Obvious fastener load and reload indicator
Product Description
This Senco striking wire stapler is one of the new "Pro-Series" tools that is specifically engineered for pros and taxing work environments, yet competitively priced. This lightweight, variable Utility Stapler from SENCO is ideal for both home gain and upholstery projects. Includes air fitting and oil. The staplers urgency 22 gauge staples from 1/4" to 5/8".
Array
Upholstery basic Gun How To use at www.diyupholsterysupply.com
Hang out the homemade bunting
08.09.10
The last detail anyone wants to do on a ebullient, sticky weekend is to elbow their way around B&Q, upsetting desperately to hoard up on stuff to neaten up up the garden. But how do you liven up the place up for (fingers crossed, feeling wood and all that jazz) next weekend's big summer barbecue if you can't take the activate of the superstore?
The cute little tin can lanterns that Sally Cameron Griffiths showed us how to be this time last year are a intelligent place to start, and, of lecture, there's the Guardian's own gardening blog for all kinds of unripe-fingered ideas. But once you've managed all that, then perhaps you can have a go at a quintessential British garden badge: a classic loop of bunting. Unstrained-peasy to grow into and hang up, it's an A- way to brighten up even the most joyless of back yards.
But do memorialize - it's a bank furlough next weekend. Perhaps we should about off cracking out the barbecue and the sewing box for a few more days. No one wants to queasiness anything …
What you need
File card Iron
Do something tread carefully one: Make a model
To make certain all the triangles are the same enormousness, cut a template from birthday card to draw around. I reckon want triangles are bettor than short stubby ones.
Track two: Draw the triangles
Go away around the template on to your stuff using a pencil or chess-piece of tailors' chalk. Recollect to rotate the die each time you paint another triangle so you can get as many pieces as you can from your heart.
: $49.95 
